محمل انزلاقي صغير بعجلة 430 كجم، مقاس HT430

ال 430kg Mini Wheel Skid Steer Loader is a compact wheeled loading machine powered by a 23 HP Briggs & Stratton engine. It combines a 430 kg carrying capacity, a 0.17 m³ bucket, hydraulic working systems, and herringbone engineering tires in a machine with a net weight of 950 kg.

With a total width of 1200 mm and an overall length of 2600 mm with the bucket installed, the loader has a compact structural design. Its lifting system reaches a maximum working height of 2400 mm and a maximum discharge height of 2000 mm.

Briggs & Stratton 23 HP Engine

The 430kg Mini Wheel Skid Steer Loader is equipped with a Briggs & Stratton engine rated at 23 HP. The engine operates at a calibrated speed of 3600 rpm and supplies power for machine travel, hydraulic lifting, and bucket operation.

The fuel tank has a capacity of 30 L. The machine’s specified noise level is no more than 95 dB.

The engine is integrated with the hydraulic pumps, wheeled travel system, and front lifting assembly. This configuration provides the required power for driving, lifting, carrying, and unloading materials.

430 kg Carrying and Lifting Capacity

The 430kg Mini Wheel Skid Steer Loader has a carrying capacity of 430 kg, equivalent to the listed value of 947.9 lb. The supplied specifications state that this capacity represents 62% of the tipping load.

The maximum lift is also specified as 430 kg or 947.9 lb. These values define the machine’s rated carrying and lifting configuration.

A 0.17 m³ bucket is fitted to the front lifting arms. The corresponding British-system bucket capacity is listed as 6 ft³. The bucket has a width of 1200 mm, matching the total width of the machine.

Lifting and Discharge Dimensions

The maximum working height of the 430kg Mini Wheel Skid Steer Loader is 2400 mm, with a listed British-system value of 94.84 inches. The maximum pin height is 2200 mm or 86.61 inches.

The bucket reaches a maximum discharge height of 2000 mm, equivalent to the listed 78.74 inches. Its maximum horizontal discharge distance is 800 mm or 31.4 inches.

The bucket swing angle is 55°, while the bucket discharge angle is 40°. These dimensions and angles describe the movement range of the bucket and front lifting assembly during loading and unloading.

نظام العمل الهيدروليكي

The 430kg Mini Wheel Skid Steer Loader uses a hydraulic system with a specified pressure of 25 MPa. This is also listed as 250 bar or 3626 psi.

The standard hydraulic flow rate is 33 L/min. Traveling pump flow is specified as 75 L/min or 90 L/min, while replenishment pump flow is listed as 10 L/min or 13 L/min.

The working-system flow rate is 44 L/min. The hydraulic tank has a capacity of 20 L and supplies hydraulic oil to the machine’s working and travel systems.

These hydraulic components operate the front lifting arms, bucket movement, and wheeled travel functions of the loader.

Wheeled Travel System

The 430kg Mini Wheel Skid Steer Loader is equipped with 18 × 8.5-8 herringbone engineering tires. The wheeled structure works with the travel pumps and hydraulic system to move and steer the machine.

Travel speed ranges from 0 to 7 km/h, with a listed British-system range of 0 to 4.3 miles per hour. The loader has a climbing angle of 20° and a departure angle of 20°.

The wheelbase is 860 mm or 33.85 inches. Ground height is specified as 100 mm or 3.93 inches.

أبعاد الآلة المدمجة

The 430kg Mini Wheel Skid Steer Loader measures 1350 mm in total height, corresponding to the listed value of 53.14 inches. Its total width is 1200 mm or 47.24 inches.

Without the bucket, the machine has a length of 2020 mm or 79.52 inches. The total length increases to 2600 mm or 102.36 inches when the bucket is installed.

The 1200 mm bucket width is also listed as 47.24 inches. These dimensions accommodate the engine, hydraulic tanks, operating position, lifting arms, bucket, tires, and rear machine structure.

Net Weight and Structural Configuration

The net weight of the 430kg Mini Wheel Skid Steer Loader is 950 kg, with a corresponding listed weight of 2094.39 lb. This weight includes the main machine structure and installed operating systems.

The loader combines its wheeled undercarriage, 23 HP engine, hydraulic pumps, lifting arms, and bucket within its compact dimensions. Its 860 mm wheelbase and 1200 mm total width form the main dimensional configuration of the machine.

430kg Mini Wheel Skid Steer Loader Specifications

معدات التحميل ذات العجلات المدمجة

The 430kg Mini Wheel Skid Steer Loader combines a 23 HP Briggs & Stratton engine, 430 kg carrying capacity, and 0.17 m³ bucket. Its hydraulic system provides a 25 MPa system pressure and a 44 L/min working-system flow rate.

With a maximum working height of 2400 mm, a 2000 mm maximum discharge height, and a travel speed of 0–7 km/h, the 430kg Mini Wheel Skid Steer Loader provides a compact configuration for material lifting, carrying, loading, and unloading.