The HT-JS1000 2 Ton Hydraulic Tandem Road Roller features 1,000 mm front and rear steel drums, hydraulic dual-drum drive and 30 kN vibration force. Its compact structure, hydraulic steering and pressure water-spraying system support road and construction compaction.
The HT-JS1000 2 Ton Hydraulic Tandem Road Roller is a compact ride-on compaction machine with front and rear steel drums, full hydraulic travel and hydraulic steering. It has an operating weight of 1,980 kg and a compaction width of 1,000 mm.
The machine uses front and rear hydraulic drum drive with stepless speed adjustment. Front-drum hydraulic vibration is supplied as standard, while front and rear dual-drum vibration is available as an optional configuration.
Powered by a Changchai ZN390B diesel engine, the 2 Ton Hydraulic Tandem Road Roller delivers 39 hp at 2,600 rpm. It also includes pressure water spraying, articulated steering and front and rear LED lights.
| Parameter | Specification |
|---|---|
| Model | HT-JS1000 |
| Operating weight | 1,980 kg |
| Travel speed | 0–12 km/h |
| Turning radius | 2,000 mm |
| Gradeability | 30% |
| Drum width, front and rear | 1,000 mm |
| Drum diameter, front and rear | 610 mm |
| Static linear load, front/rear | 100/83 N/cm |
| Nominal amplitude | 0.5 mm |
| Vibration frequency | 75 Hz |
| Exciting force | 30 kN |
| Drive type | Hydraulic dual-drum drive |
| Speed control | Stepless |
| Vibration type | Hydraulic |
| Steering type | Hydraulic |
| Water spraying | Electric-control pressure spraying |
These parameters define the main travel and compaction capabilities of the 2 Ton Hydraulic Tandem Road Roller.
The HT-JS1000 is equipped with a Changchai ZN390B diesel engine. It uses a vertical, three-cylinder, water-cooled electronic-injection configuration and meets the China Stage III emission standard listed in the supplied specifications.
| Engine parameter | Specification |
| Engine model | Changchai ZN390B |
| Engine type | Vertical three cylinder |
| Cooling system | Water cooled |
| Fuel system | Electronic injection |
| Công suất định mức | 39 hp at 2,600 rpm |
| Fuel tank capacity | 36 L |
| Fuel consumption rate | 240 g/kWh |
| Listed emission standard | China Stage III |
The engine supplies power to the hydraulic travel, steering and vibration systems. Its 36 L fuel tank supports machine operation during compaction work.
The 2 Ton Hydraulic Tandem Road Roller uses hydraulic drive with stepless speed adjustment. The operator can select a travel speed between 0 and 12 km/h according to the operating requirement.
Hydraulic motors drive both the front and rear drums. This dual-drum drive configuration supports machine movement and positioning during compaction.
The hydraulic system uses a Sauer-Danfoss variable piston pump and cycloidal hydraulic motors according to the supplied product information. NSK mounted radial ball bearings are also included in the machine configuration.
The HT-JS1000 has front and rear steel drums. Both drums measure 1,000 mm wide and 610 mm in diameter.
The tandem structure allows both drums to contact and compact the working surface as the machine travels. Static linear load is listed as 100 N/cm at the front and 83 N/cm at the rear.
The 1,000 mm drum width gives the 2 Ton Hydraulic Tandem Road Roller a compact working profile for selected road and construction compaction areas.
The standard machine configuration provides hydraulic vibration on the front drum. The vibration system has a nominal amplitude of 0.5 mm, a frequency of 75 Hz and an exciting force of 30 kN.
Front and rear dual-drum vibration is available as an optional configuration. Buyers should confirm whether standard front-drum vibration or optional dual-drum vibration is required before production.
| Vibration parameter | Specification |
| Standard vibration | Front drum |
| Optional vibration | Front and rear drums |
| Nominal amplitude | 0.5 mm |
| Vibration frequency | 75 Hz |
| Exciting force | 30 kN |
| Vibration control | Hydraulic |
The hydraulic vibration system supports the compaction function of the 2 Ton Hydraulic Tandem Road Roller while the dual-drum drive moves the machine across the working area.
The front and rear frames use an articulated connection. Hydraulic power steering controls the direction of the machine.
The HT-JS1000 has a turning radius of 2,000 mm. This compact turning measurement helps the roller maneuver and align its 1,000 mm drums within selected work areas.
The steering system and articulated frame work together during turns and repositioning.
The roller uses an electric-control pressure water-spraying system. The operator can switch the spraying function through the machine controls.
Pressure spraying distributes water across the drum area during operation. The system supports the working requirements of the steel drums while the 2 Ton Hydraulic Tandem Road Roller travels and compacts the surface.
The spraying system should be checked before work begins to confirm that the water supply and spray components are ready for operation.
The HT-JS1000 has a travel speed range of 0–12 km/h and a listed gradeability of 30%. Stepless hydraulic speed control allows the travel speed to be adjusted according to compaction and movement requirements.
| Travel parameter | Specification |
| Travel speed | 0–12 km/h |
| Gradeability | 30% |
| Turning radius | 2,000 mm |
| Drive system | Front and rear hydraulic drum drive |
The machine should be operated according to the surface condition, slope and applicable operating requirements.
The HT-JS1000 measures 2,300 mm long, 1,120 mm wide and 1,700 mm high without the anti-collision beam. Its operating weight is 1,980 kg.
| Dimension | Specification |
| Overall length | 2,300 mm |
| Overall width | 1,120 mm |
| Overall height without anti-collision beam | 1,700 mm |
| Package dimensions | 2,500 × 1,200 × 1,750 mm |
| Operating weight | 1,980 kg |
The overall dimensions should be considered when arranging worksite access and machine storage. The package dimensions should be used when planning transportation and delivery.
The compact 1,120 mm overall width complements the 1,000 mm drum width of the 2 Ton Hydraulic Tandem Road Roller.
LED lights are installed at the front and rear of the machine. These lights provide illumination around the roller during operation in lower-light working conditions.
The front and rear light positions support visibility in both travel directions.
The HT-JS1000 is designed for selected road and construction compaction work. Its tandem drums, hydraulic drive and front-drum vibration provide the main working configuration.
The 1,000 mm drum width allows the machine to compact a controlled strip during each pass. Stepless travel adjustment allows operating speed to be matched to the compaction process.
With an overall width of 1,120 mm and a turning radius of 2,000 mm, the roller can operate in selected areas with limited maneuvering space.
The compact dimensions and articulated steering help the 2 Ton Hydraulic Tandem Road Roller reposition between compaction passes.
The HT-JS1000 combines full hydraulic travel, tandem steel drums and hydraulic vibration in a compact 1,980 kg machine. Its main features include:
These specifications provide a clear configuration for buyers comparing compact tandem road rollers.
The HT-JS1000 2 Ton Hydraulic Tandem Road Roller has an operating weight of 1,980 kg and front and rear drums measuring 1,000 mm wide. It uses hydraulic dual-drum drive, stepless speed control and articulated hydraulic steering.
The standard configuration includes front-drum hydraulic vibration with a 30 kN exciting force and a 75 Hz vibration frequency. Optional front and rear dual-drum vibration is available for buyers requiring a different vibration configuration.
Powered by a 39 hp Changchai ZN390B diesel engine, the machine also includes electric-control water spraying and front and rear LED lights for selected road and construction compaction work.
Hợp tác lâu dài được xây dựng trên các máy đáng tin cậy, hỗ trợ đáp ứng và cung cấp ổn định.
Chúng tôi đã mua máy xúc nhỏ gọn Mingyang vài lần.Các máy hoạt động trơn tru và đáng tin cậy, với bao bì an toàn, nói chung là giao hàng đúng thời gian, và phản hồi tích cực từ khách hàng của chúng tôi.
Các xe nâng chủ yếu được sử dụng để lưu kho và cho thuê.Chúng dễ vận hành và bảo trì, trong khi đội ngũ sau bán hàng phản ứng nhanh chóng và xác định các phụ tùng cần thiết một cách hiệu qu.
Các máy cắt cỏ được xây dựng tốt, cung cấp năng lượng ổn định và hoạt động như mong đợi trong sử dụng thực tế. ảnh và video rõ ràng đã được cung cấp trước khi tải, và giao tiếp rất trơn tru.
Chúng tôi chủ yếu sản xuất máy xúc nhỏ gọn, máy xúc bánh xích, máy xúc bánh lốp, xe nâng, máy cắt cỏ, máy móc xây dựng liên quan và các phụ kiện.
Có. chúng tôi hỗ trợ tùy chỉnh cấu hình thiết bị, thương hiệu động cơ, màu sắc, logo công ty, bao bì và chức năng sản phẩm.
Chúng tôi kiểm soát chặt chẽ mọi giai đoạn sản xuất, từ tìm nguồn cung ứng nguyên liệu và xử lý linh kiện đến lắp ráp máy và kiểm tra cuối cùng.
Có. đơn đặt hàng mẫu có sẵn để khách hàng có thể đánh giá hiệu suất, thông số kỹ thuật và chất lượng trước khi mua số lượng lớn.
Thời gian giao hàng phụ thuộc vào mô hình, số lượng đặt hàng và yêu cầu tùy chỉnh.Một lịch trình sản xuất sẽ được cung cấp sau khi xác nhận đơn hàng.
Chia sẻ thị trường mục tiêu của bạn, thiết bị cần thiết, thông số kỹ thuật, số lượng đặt hàng và nhu cầu tùy chỉnh. đội ngũ của chúng tôi sẽ đề xuất cấu hình sản phẩm phù hợp và cung cấp một giải pháp thiết thực để hỗ trợ tăng trưởng kinh.
