İnşaat, tarım, peyzaj, lojistik ve daha fazlası için güvenilir, verimli ve özelleştirilebilir inşaat makineleri.
The HT430 Tracked Mini Stone Crusher features a 220 × 350 mm feed inlet, a maximum feed size of 200 mm and a rubber-track undercarriage. Its compact dimensions support movement, transport and stone processing in selected work areas.
The HT430 Tracked Mini Stone Crusher is a compact stone-crushing machine equipped with a rubber-track undercarriage. It has a working size of 3,200 × 1,000 × 1,620 mm and a shipping size of 2,100 × 1,000 × 1,750 mm.
The machine features a 220 × 350 mm feed inlet and accepts material with a listed maximum feed size of 200 mm. Its compact width and tracked structure support machine positioning and movement around suitable stone-processing work areas.
The Tracked Mini Stone Crusher provides a mobile configuration for users who need to process stone materials at different locations without relying on a fixed machine layout.
| Parameter | Specification |
|---|---|
| Model | HT430 |
| Working dimensions | 3,200 × 1,000 × 1,620 mm |
| Shipping dimensions | 2,100 × 1,000 × 1,750 mm |
| Feed inlet size | 220 × 350 mm |
| Maximum feed size | 200 mm |
| Track type | Rubber track |
These specifications allow buyers to evaluate the machine according to its available operating space, transport dimensions, inlet opening and maximum accepted material size.
The Tracked Mini Stone Crusher measures 3,200 mm long, 1,000 mm wide and 1,620 mm high in its working configuration. The 1,000 mm machine width provides a compact structure for selected job sites where available operating space must be considered.
Before positioning the machine, the work area should provide enough room for feeding material, operating the crusher and accessing the equipment. The listed working dimensions should be used when planning the installation area.
The working length of 3,200 mm reflects the machine in its operating configuration. Buyers should compare this size with the available processing space before selecting the HT430.
The listed shipping dimensions are 2,100 × 1,000 × 1,750 mm. These measurements should be considered when arranging equipment loading, transportation and storage.
Compared with its working configuration, the Tracked Mini Stone Crusher has a shorter listed shipping length. Buyers should use the shipping dimensions when preparing transport space and use the working dimensions when planning the operating area.
The transport vehicle, loading platform and storage location should be selected according to the complete shipping size of the machine.
The HT430 has a feed inlet measuring 220 × 350 mm. This opening defines the available entry area for stone material entering the machine.
Material should be prepared according to the feed inlet dimensions before processing. Oversized material should not be forced into the inlet.
The 220 × 350 mm opening is an important specification when comparing the Tracked Mini Stone Crusher with other compact stone-processing machines. It allows buyers to assess whether the inlet size matches the material prepared for the project.
The machine has a listed maximum feed size of 200 mm. Stone material entering the crusher should remain within this specified limit.
The maximum feed size and inlet dimensions should be considered together. Material preparation should be based on the actual size and shape of the stone being processed.
Keeping the material within the stated 200 mm maximum feed size helps maintain compatibility with the listed feeding specification of the HT430 Tracked Mini Stone Crusher.
The HT430 is equipped with rubber tracks. The tracked configuration allows the machine to be repositioned around suitable stone-processing areas.
Rubber tracks provide continuous contact with the travel surface and form the mobile undercarriage of the Tracked Mini Stone Crusher. The condition of the ground and available travel path should be checked before moving the equipment.
The machine should be positioned on a suitable working surface before stone material is fed into the inlet.
The tracked undercarriage distinguishes the HT430 from a stationary stone crusher. It allows the equipment to be moved between selected operating positions within a work area.
This mobile structure can be useful when stone material is located in different parts of a site. The machine can be repositioned before crushing work begins at the next location.
The compact 1,000 mm width also helps control the space required when moving and positioning the Tracked Mini Stone Crusher.
Stone material should be checked before it enters the feed inlet. The maximum accepted feed size is 200 mm, and the inlet measures 220 × 350 mm.
Material larger than the listed maximum size should be prepared before feeding. The operator should also ensure that the material can enter through the available inlet opening.
These two specifications provide the main requirements for preparing stone material for the HT430.
The operating location should accommodate the complete working dimensions of 3,200 × 1,000 × 1,620 mm. Additional space should be available for feeding material and accessing the machine.
The ground should be suitable for the rubber-track undercarriage and the planned operating position. The travel path should also accommodate the machine’s 1,000 mm width.
When the Tracked Mini Stone Crusher is prepared for transport, the required space should be calculated from its shipping dimensions of 2,100 × 1,000 × 1,750 mm.
The HT430 combines a compact structure with a rubber-track undercarriage and clearly defined feed specifications. Its principal product characteristics include:
These specifications make the machine easy to compare with other compact stone crushers according to size, transport requirements, feed opening and maximum accepted material size.
The HT430 Tracked Mini Stone Crusher is designed around a compact 1,000 mm-wide structure and a rubber-track undercarriage. Its 220 × 350 mm feed inlet accepts stone material with a listed maximum feed size of 200 mm.
The machine measures 3,200 × 1,000 × 1,620 mm in its working configuration and 2,100 × 1,000 × 1,750 mm in its shipping configuration. These dimensions support planning for operation, transport and storage while providing a mobile format for selected stone-processing work areas.
Uzun vadeli işbirliği güvenilir makineler, duyarlı destek ve istikrarlı tedarik üzerine kuruludur.
Mingyang kompakt ekskavatörleri birkaç kez satın aldık Makineler, güvenli paketleme, genellikle zamanında teslimat ve müşterilerimizden gelen olumlu geri bildirimlerle sorunsuz ve güvenilir bir şekilde çalışır.
Forkliftler esas olarak depolama ve kiralama için kullanılır. Satış sonrası ekip hızlı bir şekilde yanıt verirken ve gerekli yedek parçaları verimli bir şekilde belirlerken, kullanımı ve bakımı kolaydır.
Biçme makineleri iyi inşa edilmiş, istikrarlı güç sağlıyor ve gerçek kullanımda beklendiği gibi performans gösteriyor. Yüklemeden önce net fotoğraflar ve videolar sağlandı ve iletişim çok sorunsuzdu.
Biz esas olarak kompakt ekskavatörler, paletli ekskavatörler, tekerlekli ekskavatörler, forkliftler, biçme makineleri, ilgili inşaat makineleri ve ataşmanları üretiyoruz.
Evet. Ekipman konfigürasyonlarının, motor markalarının, renklerinin, şirket logolarının, ambalaj ve ürün fonksiyonlarının özelleştirilmesini destekliyoruz.
Malzeme tedariki ve bileşen işlemeden makine montajına ve son muayeneye kadar her üretim aşamasını kesinlikle kontrol ediyoruz.
Evet. Müşterilerin toplu satın almadan önce performansı, özellikleri ve kaliteyi değerlendirebilmesi için örnek siparişler mevcuttur.
Teslim süresi modele, sipariş miktarına ve özelleştirme gereksinimlerine bağlıdır Sipariş onayından sonra bir üretim programı sağlanacaktır.
Hedef pazarınızı, gerekli ekipmanı, özellikleri, sipariş miktarını ve özelleştirme ihtiyaçlarını paylaşın Ekibimiz doğru ürün yapılandırmasını önerecek ve işinizin büyümesini desteklemek için pratik bir çözüm sunacaktır.
