Mesin konstruksi yang andal, efisien, dan dapat disesuaikan untuk konstruksi, pertanian, lansekap, logistik, dan banyak lagi.
The HT550A Remote Control Crawler Lawn Mower features a 550 mm cutting width, adjustable mowing height and a maximum working slope of 45 degrees. Its crawler drive, remote operation and compact design suit orchards, farms, roadsides and sloped landscaping areas.
The HT550A Remote Control Crawler Lawn Mower is a compact mowing machine designed for grass cutting on slopes, orchards, farms, roadsides and other outdoor areas. It combines remote operation with an electric crawler self-propelled system, allowing the operator to control machine movement and mowing functions from a separate position.
With a 550 mm cutting width, adjustable cutting height and a maximum working slope of 45 degrees, the mower is designed for different grass heights and ground conditions. Its compact dimensions and 137 kg machine weight support movement and positioning in selected areas where larger mowing equipment may be difficult to use.
The Remote Control Crawler Lawn Mower uses a four-stroke vertical-shaft gasoline engine and supports both hand-pull and electric starting methods. Multiple engine configurations are available for different order requirements.
The HT550A has a mowing width of 550 mm. This compact cutting width allows the machine to pass through selected orchard rows, narrow paths and restricted mowing areas while cutting a practical strip of grass during each pass.
The Remote Control Crawler Lawn Mower can be used for repeated grass-cutting work around farms, gardens, landscaped properties and other suitable outdoor spaces.
The cutting height is listed as adjustable from 20 to 180 mm. The mower deck height adjustment range is listed as 10 to 180 mm, allowing the cutting assembly to be positioned according to the grass and working area.
The height adjustment function can be operated through the remote-control system. This allows the operator to adapt the mowing deck without making a manual adjustment directly beside the cutting area.
The HT550A uses remote control as its primary operating method. The operator can control forward and reverse movement, steering and selected machine functions from a separate position.
Remote operation allows the machine to be controlled while the operator remains away from the moving cutting deck. The Remote Control Crawler Lawn Mower is therefore suited to selected slopes and difficult mowing areas where direct ride-on operation is not required.
The machine can rotate through 360 degrees in place. This turning function helps the mower change direction within a compact area without requiring a wide turning path.
In-place rotation can be useful around trees, at the end of orchard rows and in other areas where available maneuvering space is limited.
| Parameter | Specification |
|---|---|
| Model | HT550A |
| Cutting width | 550 mm |
| Mower deck height adjustment | 10–180 mm |
| Cutting height | 20–180 mm |
| Travel speed | 0–3 km/h |
| Maximum working slope | 45° |
| Operating mode | Remote control |
| Travel system | Electric crawler self-propelled |
| Charging system | Engine self-charging |
| Machine weight | 137 kg |
| Starting method | Hand pull / electric start |
| Fuel type | No. 92 gasoline |
These specifications provide the main information for comparing the Remote Control Crawler Lawn Mower with other compact slope and orchard mowing machines.
The HT550A uses an electric crawler self-propelled travel system. The crawler structure provides continuous ground contact while the electric drive moves the machine forward, backward and through turns.
The maximum travel speed is adjustable from 0 to 3 km/h. This allows the operator to control movement according to grass conditions, terrain and the required mowing pace.
The crawler configuration supports machine movement across selected slopes and uneven outdoor surfaces. Ground conditions should remain suitable for the mower’s size, weight and specified working limits.
The HT550A has a listed maximum working slope of 45 degrees. This specification allows the machine to be considered for selected sloping orchards, embankments, roadsides and landscaped areas.
When operating the Remote Control Crawler Lawn Mower on a slope, the terrain, surface condition, grass height and machine direction should remain within the operating requirements supplied with the equipment.
The standard engine is a Loncin 196 cc four-stroke gasoline engine. It uses a vertical-shaft configuration and No. 92 gasoline.
Optional engines listed for the HT550A include:
| Engine parameter | Specification |
| Mesin standar | Loncin 196 cc |
| Mesin opsional | Yamaha 190 cc |
| Mesin opsional | Kohler 200 cc |
| Mesin opsional | RATO 200 cc |
| Engine form | Vertical shaft |
| Engine cycle | Four stroke |
| Starting mode | Hand pull / electric start |
| Fuel | No. 92 gasoline |
The required engine should be selected and confirmed before production. Engine availability may be matched to the final order configuration.
The Remote Control Crawler Lawn Mower uses an engine self-charging system. This system supports the electric crawler and control configuration while the engine is operating.
The charging method is integrated into the machine, eliminating the need to describe the mower as a fully battery-powered unit. The main cutting power is provided by the gasoline engine, while the crawler travel system is electrically driven.
The HT550A has overall dimensions of 920 × 930 × 580 mm. Its packaging dimensions are 970 × 980 × 730 mm.
| Dimension | Specification |
| Overall machine dimensions | 920 × 930 × 580 mm |
| Packaging dimensions | 970 × 980 × 730 mm |
| Machine weight | 137 kg |
| Packing weight | Approximately 168 kg |
The compact dimensions support movement through selected narrow areas and reduce the space required for storage. The packaging dimensions and approximate packing weight should be used when planning transportation and delivery.
The HT550A can be used for grass cutting between selected orchard rows and around farm areas. Its 550 mm cutting width and compact crawler structure allow it to move through suitable restricted spaces.
Remote operation also allows the operator to control the machine without riding on it. This configuration can assist with mowing around trees, paths and other farm features.
With a maximum listed working slope of 45 degrees, the machine can be considered for selected embankments, roadsides and sloped landscaped areas.
The Remote Control Crawler Lawn Mower can change direction through in-place rotation, helping it maneuver where a conventional mower may require a wider turning area.
The adjustable cutting height allows the HT550A to work with different grass heights in gardens and landscaped properties. Its compact overall size supports operation in selected locations with limited access.
The cutting height and travel speed can be adjusted according to the mowing area and grass conditions.
The HT550A combines remote operation, crawler mobility and an adjustable mowing deck in a compact machine. Its principal features include:
These specifications make the mower suitable for selected orchards, farms, slopes, roadsides and landscaping projects.
The HT550A Remote Control Crawler Lawn Mower has a 550 mm cutting width, adjustable cutting height and a maximum working slope of 45 degrees. Its remote-control system manages machine movement, steering and mower deck adjustment.
A Loncin 196 cc four-stroke engine is supplied as the standard configuration, with Yamaha, Kohler and RATO engines listed as options. Combined with an electric crawler self-propelled system, compact dimensions and in-place turning, the HT550A provides a flexible mowing solution for selected sloping and restricted outdoor areas.
Kerja sama jangka panjang dibangun di atas mesin yang andal, dukungan responsif, dan pasokan yang stabil.
Kami telah membeli excavator kompak Mingyang beberapa kali. Mesin beroperasi dengan lancar dan andal, dengan kemasan yang aman, umumnya pengiriman tepat waktu, dan umpan balik positif dari pelanggan kami.
Forklift terutama digunakan untuk pergudangan dan penyewaan. Mereka mudah dioperasikan dan dirawat, sementara tim purna jual merespons dengan cepat dan mengidentifikasi suku cadang yang dibutuhkan secara efisien.
Mesin pemotong rumput dibangun dengan baik, memberikan daya yang stabil, dan bekerja seperti yang diharapkan dalam penggunaan sebenarnya. Foto dan video yang jelas disediakan sebelum pemuatan, dan komunikasi sangat lancar.
Kami terutama memproduksi ekskavator kompak, ekskavator perayap, ekskavator beroda, forklift, mesin pemotong rumput, mesin konstruksi terkait, dan perlengkapannya.
Ya. Kami mendukung kustomisasi konfigurasi peralatan, merek mesin, warna, logo perusahaan, kemasan dan fungsi produk.
Kami secara ketat mengontrol setiap tahap produksi, mulai dari sumber material dan pemrosesan komponen hingga perakitan mesin dan inspeksi akhir.
Ya. Pesanan sampel tersedia sehingga pelanggan dapat mengevaluasi kinerja, spesifikasi, dan kualitas sebelum pembelian massal.
Waktu pengiriman tergantung pada model, jumlah pesanan dan persyaratan penyesuaian. Jadwal produksi akan diberikan setelah konfirmasi pesanan.
Bagikan target pasar Anda, peralatan yang dibutuhkan, spesifikasi, jumlah pesanan dan kebutuhan penyesuaian. Tim kami akan merekomendasikan konfigurasi produk yang tepat dan memberikan solusi praktis untuk mendukung pertumbuhan bisnis Anda.
