Machines de construction fiables, efficaces et personnalisables pour la construction, l'agriculture, l'aménagement paysager, la logistique, etc.
The HT800 Mini Concrete Mixer Truck combines a 380 dm³ mixing capacity, an 800 kg maximum load and a 90-degree hydraulic dumping system. Its compact six-wheel design supports concrete or mortar mixing, short-distance transport and unloading on small construction sites.
The HT800 Mini Concrete Mixer Truck is a compact wheeled machine designed for mixing, transporting and unloading concrete or mortar on small construction sites. It combines a 380 dm³ mixing capacity with an 800 kg maximum load and a hydraulically operated dumping system.
Powered by a 420 cc Dajiang gasoline engine, the machine produces 13.5 hp at 3,600 rpm. Its wheeled chassis, 6 km/h travel speed and 26-degree climbing capability support movement between suitable mixing and unloading locations.
The Mini Concrete Mixer Truck has a transport width of 1,250 mm and can be used in selected construction areas where access and operating space are limited. The integrated mixing and hydraulic unloading functions reduce the need to transfer material between separate machines.
The machine is equipped with a Dajiang engine featuring a single-cylinder, four-stroke and air-cooled structure. It has a displacement of 420 cc and a rated output of 13.5 hp at 3,600 rpm.
The supplied product specifications identify the engine as an EPA configuration. It uses No. 92 gasoline and is connected to a 6 L fuel tank.
The air-cooled engine does not require a separate water-cooling circulation system. This structure simplifies the cooling layout of the Mini Concrete Mixer Truck and supports routine engine inspection and maintenance.
| Parameter | Specification |
|---|---|
| Machine model | HT800 |
| Engine brand | Dajiang |
| Engine type | Single cylinder, four stroke, air cooled |
| Engine configuration | Horizontal shaft |
| Engine displacement | 420 cc |
| Rated output | 13.5 hp at 3,600 rpm |
| Fuel type | No. 92 gasoline |
| Fuel tank capacity | 6 L |
The engine provides power for machine travel, mixing and hydraulic unloading. Fuel level, air filtration and engine condition should be checked as part of routine operation.
The Mini Concrete Mixer Truck has a listed mixing capacity of 380 dm³. The drum dimensions are 750 × 900 mm, providing space for mixing suitable quantities of concrete or mortar.
The machine has a maximum load capacity of 800 kg. Operators should keep the loaded material within the specified limit and distribute it appropriately during mixing and travel.
The 380 dm³ capacity and wheeled structure allow mixing and transport to be completed with one compact machine. This configuration is suitable for projects that require repeated movement between material preparation and unloading areas.
The HT800 uses a hydraulic dumping system with a maximum tipping angle of 90 degrees. Hydraulic operation assists with unloading mixed material from the drum at the required work location.
The tipping function allows the Mini Concrete Mixer Truck to discharge material without relying entirely on manual unloading. The operator can position the machine before activating the hydraulic system.
The machine should be placed on a suitable surface during unloading, and the load must remain within the specified capacity.
The transport dimensions, excluding the foot pedals, are 2,370 × 1,250 × 1,450 mm. The complete machine dimensions, including the foot pedals, are 2,880 × 1,250 × 1,350 mm.
| Dimension | Specification |
| Transport dimensions without foot pedals | 2,370 × 1,250 × 1,450 mm |
| Overall dimensions with foot pedals | 2,880 × 1,250 × 1,350 mm |
| Drum dimensions | 750 × 900 mm |
| Largeur châssis | 1,250 mm |
| Net machine weight | 720 kg |
| Maximum load | 800 kg |
The 1,250 mm chassis width gives the Mini Concrete Mixer Truck a compact profile for selected small construction sites. Both transport and complete machine dimensions should be considered when arranging delivery, storage and worksite access.
The HT800 has a maximum travel speed of 6 km/h and a listed climbing capability of 26 degrees. Its wheeled structure allows the machine to move between suitable loading, mixing and unloading locations.
| Travel parameter | Specification |
| Maximum travel speed | 6 km/h |
| Climbing capability | 26° |
| Number of tires | 6 |
| Largeur châssis | 1,250 mm |
The six-wheel configuration supports machine travel and load distribution. Surface condition, slope, load position and available clearance should be considered before moving the machine around a construction site.
The listed configuration includes one hydraulic oil filter element, one air filter element and one throttle cable. These components support routine servicing of the hydraulic and engine systems.
| Component | Quantity |
| Tires | 6 |
| Hydraulic oil filter element | 1 |
| Air filter element | 1 |
| Throttle cable | 1 |
Regular inspection of filters, tires, hydraulic components and the throttle cable helps keep the Mini Concrete Mixer Truck ready for daily operation. Replacement procedures should follow the technical documentation supplied with the equipment.
The machine can mix, transport and unload concrete or mortar for selected small building and site-development projects. Its compact dimensions help it work in areas where larger mixer trucks may require more operating space.
The Mini Concrete Mixer Truck can support selected landscaping, pathway, foundation and property-improvement projects requiring concrete or mortar preparation.
For suitable farm projects, the machine can assist with mixing and transporting material for small foundations, paths and other concrete work.
The 1,250 mm chassis width and compact transport dimensions allow the machine to enter selected work areas with limited access. The actual site entrance and turning area should be measured before operation.
The HT800 combines three primary functions in one wheeled machine. Material can be mixed in the 380 dm³ drum, transported around the worksite and discharged through the hydraulic tipping system.
This integrated design reduces the need to move mixed material manually between separate mixing and transport equipment. The Mini Concrete Mixer Truck can be repositioned at a maximum travel speed of 6 km/h before unloading.
The HT800 offers a combination of compact dimensions, wheeled mobility and hydraulic unloading. Its main product specifications include:
These specifications make the Mini Concrete Mixer Truck a practical option for selected projects requiring concrete or mortar mixing, short-distance transport and hydraulic unloading.
The HT800 Mini Concrete Mixer Truck is powered by a 420 cc Dajiang engine and has a rated output of 13.5 hp at 3,600 rpm. It provides a 380 dm³ mixing capacity, an 800 kg maximum load and a 90-degree hydraulic dumping system.
With six tires, a 1,250 mm chassis width, a maximum travel speed of 6 km/h and a 26-degree climbing capability, the machine is designed for movement across suitable construction areas. Its compact dimensions make it an option for small projects where mixing, transport and unloading need to be completed with one machine.
La coopération à long terme repose sur des machines fiables, un support réactif et un approvisionnement stable.
Nous avons acheté des pelles compactes Mingyang plusieurs fois Les machines fonctionnent sans heurts et de manière fiable, avec un emballage sécurisé, généralement une livraison à temps, et des retours positifs de nos clients.
Les chariots élévateurs sont principalement utilisés pour l'entreposage et la location Ils sont faciles à utiliser et à entretenir, tandis que l'équipe après-vente répond rapidement et identifie efficacement les pièces de rechange requises.
Les tondeuses sont bien construites, offrent une puissance stable et fonctionnent comme prévu dans l'utilisation réelle Des photos et des vidéos claires ont été fournies avant le chargement et la communication s'est déroulée très facilement.
Nous fabriquons principalement des pelles compactes, des pelles sur chenilles, des pelles sur roues, des chariots élévateurs, des tondeuses, des engins de construction et des accessoires connexes.
Oui. Nous prenons en charge la personnalisation des configurations d'équipement, des marques de moteurs, des couleurs, des logos d'entreprise, des emballages et des fonctions des produits.
Nous contrôlons strictement chaque étape de production, de l'approvisionnement en matériaux et du traitement des composants à l'assemblage de la machine et à l'inspection finale.
Oui. Des exemples de commandes sont disponibles afin que les clients puissent évaluer les performances, les spécifications et la qualité avant l'achat en gros.
Le délai de livraison dépend du modèle, de la quantité de commande et des exigences de personnalisation Un calendrier de production sera fourni après confirmation de la commande.
Partagez votre marché cible, l'équipement requis, les spécifications, la quantité de commande et les besoins de personnalisation Notre équipe vous recommandera la bonne configuration de produit et fournira une solution pratique pour soutenir la croissance de votre entreprise.
